Prices from
£28,995
Contact us now for ‘SPARKTACULAR’ introductory offers
The FIRECUT CNC Plasma Cutting Table is a compact, gantry-based CNC cutting system designed to deliver industrial-grade performance within a space-efficient footprint. It is engineered for the precision cutting of all electrically conductive sheet metals, including mild steel, stainless steel, aluminium, and galvanised steel, making it suitable for a wide range of fabrication environments from small workshops through to training and light industrial production.
FIRECUT integrates Hypertherm Edge Connect CNC control with Phoenix software, providing an intuitive operator interface suitable for both experienced users and newcomers. Cutting parameters are embedded via ProNest LT nesting and optimisation software, enabling automated toolpath generation, consistent part quality, and minimal setup input.
The machine is built on a rigid welded steel frame with machined aluminium structural sections for stability and accuracy under continuous use. Motion is driven by 400W EtherCAT servo systems on all axes, combined with Hiwin linear rails and precision bearings to deliver smooth, accurate, and repeatable positioning.
FIRECUT is a cost-efficient CNC plasma system delivering performance typically associated with higher-end industrial machines. Available in sizes from 1m x 1m up to 3m x 1.5m, it is suited to small workshops, training environments, agricultural engineering, and startup fabrication businesses requiring reliable and scalable cutting capability.
Available Configurations
-
1000 x 1000 mm
-
1500 x 1500 mm
-
2000 x 1000 mm
-
3000 x 1500 mm
Machine Build & Structure
- Heavy-duty welded steel frame construction
- Dual-drive gantry system (synchronised X/Y axis EtherCAT servo control)
- Hiwin linear rails and carriages on all axes
- Planetary gearboxes (APEX / EISELE / ELT)
- Designed for industrial duty cycles and continuous operation
Technical Specifications
Cutting Performance
- Maximum cut area: up to 1550 × 3050 mm (largest model)
- Maximum vertical clearance (torch to table): 200 mm
- Table load capacity: 800 kg/m²
- Material compatibility: all conductive metals
Motion System
- Rapid traverse speed: up to 15,000 mm/min
- Axis positioning system: EtherCAT-controlled servo drives
- Drive system: rack and pinion (1.5 module)
- X-axis: K.H. helical rack
- Y-axis: straight rack system
- Z-axis: ball screw linear module (200 mm stroke)
Accuracy
- ISO 9013
- Bidirectional repeatability: up to 0.05 mm / 1 m (model dependent)
Key Benefits
-
High-speed motion system
Faster cutting cycles, reduced lead times.
-
Rigid gantry & heavy-duty frame
Minimises vibration, ensures stability, and delivers consistent accuracy.
-
Automatic torch height control (ATHC)
Maintains optimal distance to guarantee clean cuts and minimise wear.
-
Open-architecture CNC control & software integration
Easy importing of CAD/CAM files, nesting, and automation.
-
Flexible torch configuration
Compatible with a wide range of plasma power supplies.
-
Cut Pro Wizard
Provides a simple 4 step system to import nest files, aligns the plate and starts the cutting process.
-
High-speed motion system
Full EtherCAT-based control architecture including servo drives, I/O modules, and plasma interface integration for deterministic motion control.
| Model / Specification | Units | FIRECUT 1000×1000 | FIRECUT 1000×2000 | FIRECUT 1500×1500 | FIRECUT 1500×3000 |
|---|---|---|---|---|---|
| Working Area | |||||
| Max cut area | mm | 1050×1050 | 1050×2050 | 1550×1550 | 1550×3050 |
| Max vertical distance between cutting head and work table | mm | 200 | |||
| Table height | mm | 500 | |||
| Table load capacity | kg/m² | 800 | |||
| Travels | |||||
| Travel Y-axis | mm | 1200 | 1200 | 1700 | 1700 |
| Travel X-axis | mm | 1200 | 2300 | 1900 | 3300 |
| Travel Z-axis | mm | 200 | |||
| Feeds | |||||
| Rapid feeds | m/min | 15000 | |||
| Precision | |||||
| Axis positional accuracy | mm | 0.03 | 0.05 | 0.05 | 0.05 |
| Measurements and Weights | |||||
| Machine dimensions (L×W×H) | mm | 1725×2715×1650 | 1725×3150×1650 | 2225×2500×1650 | 2225×4150×1650 |
| Packing dimensions | mm | 1800×2750×1700 | 1800×3350×1700 | 2300×2600×1700 | 2300×4350×1700 |
| Net weight | kg | 850 | 1200 | 1200 | 1500 |
| Gross weight | kg | 930 | 1280 | 1280 | 1600 |
| Construction | |||||
|
Table type: Connected with bridge
Suction type: Water table or vacuum connector with mechanical shutter control
Dual-bridge drive: Yes
Linear guides: Y CPC 15mm / X CPC 20mm
Z axis: Linear module (200mm stroke)
Gearboxes: APEX / EISELE / ELT planetary
Servo motors: 400W Panasonic EtherCAT
XY transmission: Straight rack (1.5 module) / Helical rack (1.5 module)
Z transmission: Ball screw / linear rail system / magnetic breakaway / THC integration / arc voltage + ohmic sensing system
THC: Hypertherm Sensor THC
Torch coupling: Magnetic with crash sensor
CNC unit: Hypertherm Edge Connect
Software: Hypertherm Pronest LT
Touchscreen: 19” Industrial
I/O module: Beckhoff EtherCAT
Pneumatics: Winman
Features: Remote assist / Auto resume / Laser pointer
Delivery: 7–9 weeks
|
|||||
Features
Hypertherm SYNC Cartridges
SYNC cartridges last up to twice as long and lock in with a simple twist — no stacking parts, no mix-ups. Faster swaps, fewer mistakes, less downtime.
Drive & Motion System
EtherCAT servos & drives, linear rails and precision helical gearboxes on X/Y axes for backlash-free, smooth motion.
Frame & Safety
Rigid steel frame with machined aluminium sections, integrated cable management, and magnetic breakaway torch protection for safe, reliable operation.
Height Control System (THC / Lifter)
- Automatic Torch Height Control (THC): Hypertherm Sensor THC
- Collision protection: magnetic breakaway coupling system
- Z-axis crash protection integrated
- Maintains optimal arc voltage and standoff distance for cut consistency
| Hypertherm Cutting Data | |||
|---|---|---|---|
| Model | Mild Steel Pierce/Severence | Stainless Steel Pierce/Severence | Aluminium Pierce/Severence |
| Powermax 45 SYNC | 12mm/29mm | 12mm/29mm | 12mm/29mm |
| Powermax 65 SYNC | 16mm/32mm | 16mm/32mm | 16mm/32mm |
| Powermax 85 SYNC | 20mm/38mm | 20mm/38mm | 20mm/38mm |
| Powermax 105 SYNC | 22mm/50mm | 22mm/50mm | 22mm/50mm |
| PowerMax 125 | 25mm/44mm | 25mm/57mm | 25mm/57mm |
| MaxPro 200 | 32mm/75mm | 20mm/64mm | 32mm/75mm |
| Note: SYNC values are single published capacities applied across all three materials. Actual results vary with material, gas, consumables, and setup. | |||
Operator Control Panel
Edge Connect drives every move all through our purpose-built Control Panel.
-
19″ touch LCD displays full system feedback
-
CutPro Wizard: Load > align > Cut
(ready for cutting in 2 mins) -
Built-in Ethernet link for file sync & remote help.
Nesting & cut Software
ProNest, nesting and optimisation software auto-applies the best cutting methods – enabling consistent, high quality parts with minimal operator input.
Edge Connect
Cut Pro Wizard
Frequently Asked Questions
Choosing the right plasma cutting table is essential for achieving accuracy, efficiency, and consistent cut quality in metal fabrication. Below you’ll find answers to common questions about how plasma cutting tables work, what materials they handle, and why FIRECUT is a trusted CNC plasma cutting solution.
Q: What is the FIRECUT CNC plasma cutting table?
A: The FIRECUT CNC plasma cutting table is an industrial-grade cutting system designed for precise, high-speed processing of sheet metal. It combines a rigid steel frame, servo-driven motion system, and Hypertherm control technology to deliver consistent, repeatable cutting performance across a range of fabrication applications.
Q: What materials can the FIRECUT cut?
A: FIRECUT is designed to cut all electrically conductive metals, including:
- Mild steel
- Stainless steel
- Aluminium
- Galvanised steel
- Copper and brass
The system is optimised for clean edge quality across both thin sheet and thicker plate materials.
Q: What cutting thickness can FIRECUT handle?
A: Cutting thickness depends on the plasma power source paired with the machine. FIRECUT is compatible with Hypertherm systems ranging from light fabrication units to high-amperage industrial plasma sources, allowing it to handle both precision sheet cutting and heavier plate work.
Q: What table sizes are available for FIRECUT?
A: FIRECUT is available in multiple working area configurations:
- 1000 × 1000 mm
- 1000 × 2000 mm
- 1500 × 1500 mm
- 1500 × 3000 mm
This allows the system to be matched to your typical sheet sizes and workshop space.
Q: How accurate is the FIRECUT CNC system?
A: FIRECUT delivers positional accuracy of approximately 0.03–0.05 mm, depending on configuration. This is achieved through its servo-driven motion system, precision linear guides, and rigid gantry construction, ensuring consistent results across repeated jobs.
Q: What motion system does FIRECUT use?
A: FIRECUT uses an industrial EtherCAT-based servo system with Panasonic drives, rack-and-pinion transmission on the X and Y axes, and a ball screw-driven Z-axis. This combination provides smooth motion, high speed, and reliable positioning under load.
Q: Does FIRECUT include automatic torch height control?
A: Yes. FIRECUT is equipped with Hypertherm Sensor THC (Torch Height Control), which automatically maintains the correct torch distance from the material. This ensures consistent cut quality, especially on uneven or warped sheets.
Q: What software does FIRECUT use?
A: FIRECUT integrates with Hypertherm Edge Connect CNC control and ProNest LT CAD/CAM software. This allows you to import CAD files such as DXF, optimise nesting, and generate efficient cutting paths for production.
Q: Is FIRECUT suitable for small workshops?
A: Yes. FIRECUT is designed to scale from compact workshop environments to larger fabrication operations. Smaller bed sizes offer a space-efficient solution while maintaining the same industrial-grade components and control systems as larger machines.
Q: What extraction options are available?
A: FIRECUT can be configured with either:
- Water table system
- Downdraft extraction system with mechanical shutter control
This allows effective management of fumes and debris based on your workshop setup.
Q: What makes FIRECUT different from other plasma tables?
A: FIRECUT is built using industrial-grade components typically found in higher-end systems, including:
- EtherCAT servo control architecture
- Hypertherm CNC and THC integration
- Dual-drive gantry system
- Precision linear guides and gearboxes
This results in improved reliability, motion accuracy, and long-term performance compared to entry-level plasma tables.
Q: Can FIRECUT recover from a power loss?
A: Yes. FIRECUT includes a pause and resume function, allowing the machine to continue cutting from the last position after a power interruption, reducing material waste.
Q: How long does delivery take?
A: Typical delivery time for a FIRECUT system is approximately 7–9 weeks, depending on configuration and selected options.
Q: Is installation and support provided?
A: Yes. FIRECUT systems are supplied with technical support, including remote assistance. Installation guidance and operator training can also be provided to ensure correct setup and efficient operation.
Fume Extraction
Clean safe air with Sideros Fume Extraction
Optional Sideros fume extraction system
- Filtration down to < 1mg/m³
- Captures welding, cutting & grinding fumes
- Reinforced for aluminium dust protection
No shop smoke, no risk.
6 year power supply warranty
Hypertherm Powermax Now with an Industry-Leading 6-Year Warranty.
Hypertherm has officially extended the warranty on all Powermax® plasma power supplies from 3 years to an unmatched 6 years. This reinforces their commitment to offering the most durable and reliable plasma cutting systems in the industry.
At CityPlasma we are proud to supply the full range of Powermax systems – now backed by the longest warranty in the industry.
